Extraction unit D-LE 255 S/SB CAM

Extraction systems for CAM machines with huge suction power, low noise level and highest filtration efficiency

Best extraction results with maximum protection against fine dusts

The extraction units have a powerful, sound-insulated high-pressure fan and are equipped with automatic air volume regulation, automatic switch-off and filter change indicator. The D-LE 255/CAM series has the possibility of the detection device (CNC machine) to set the prescribed air volume flow and is used as extraction of dusts primarily, metal dust, mineral dust, plastic dust, plaster dust oxide ceramic and other ceramic dusts.

Product Consulting Buy from retailers

Product Benefits

Connection

Automatic and intelligent bidirectional communication with your CAM unit.

Workflow

Consistent suction power due to automatic air volume regulation independent of the filter filling level.

Energy-efficient

Effective dust reduction by means of a high volume flow of approx. 4000 l/min. with low power consumption.

Protection

Very high health protection due to two-stage filter system of dust class M.

Product Highlights

Volume flow Filter technology Communication

Volume flow control
The air volume flow is regulated automatically. The air volume at the suction funnel is always the same, regardless of the degree of contamination of the filter medium. The extraction unit carries out a self-test at certain time intervals, at the same time as the air lines are sucked free. The height of the air volume can be adjusted depending on the type of detection device used (suction jaw) and its associated air volume and can be read in the display.
The volume flow control device monitors not only the air volume flow, but also the degree of contamination of the pre-filter and ultra-fine filter. The condition of the filter components as well as the drop in the extracted air volume flow at the detection device (extraction mouth) below the specified minimum value is indicated visually and acoustically.

Filter technology

Nothing looks as good on you as your health!

Our model range D-LE 255 extraction units are basically equipped with a dual filter system.
The dust is collected in a large-volume, double-layer filter bag with a capacity of up to 10 kg, trapped in a mesh basket and stabilised, improving the maximum fill level that can be achieved and optimising suction performance at the workplace or appliance.
The filter bags can be tightly sealed when the grid basket is removed, thus enabling dust-free and easy disposal.
The large-area ultra-fine filter, which is installed downstream of the filter bag, captures even micro-dusts of 0.5µ grain size at a rate of 99.98 % and provides additional health protection.
The condition of the filter components as well as the drop in the extracted air volume at the suction funnel is indicated visually and acoustically.

Bidirectional communication – simply connect and extract

The interface provides intelligent bidirectional communication with your CAM unit. It enables messages to be processed and measures to be initiated accordingly, such as switching on and off, querying the filter status and the functional status of the extraction unit. Despite a full filter, the extraction continues to work until the current production step in the CNC is completed. The extraction system reports the filter status to the CNC machine and does not allow a further programme start.

Product

Energy efficiency Engine technology Mode

Energy efficiency

The energy efficiency of our extraction systems is defined by a very high suction power with low power consumption. All units of the D-LE series are characterised in their design by enormously short air flows with minimal turbulence. The volume flow control device controls the extraction rate with significantly reduced energy consumption and ensures the user an extraction system with high performance at minimum operating costs.

Engine technology

Depending on the running times and size of your milling machines, Harnisch+Rieth offers you two different variants. For the smaller milling machines we recommend the D-LE 255 S/CAM with collector motor, for larger milling machines with long working intervals the D-LE 255 SB/CAM with brushless motor technology. The engine compartment is additionally equipped with sound insulation and ensures pleasant working conditions. Both extraction units guarantee enormous suction power and combine peace, health protection and cleanliness in your laboratory.

Mode

The following option for setting the extraction parameters is available for the D-LE 255 CAM series.
Automatic mode:
The extraction capacity can be operated and controlled in stages in both control variants “air volume (L/s) and “air speed” (m/s). The air volume flow is automatically regulated and is always the same at the suction funnel, regardless of the degree of contamination of the filter medium.

Technical data

Width	420 mm
Depth	390 mm
Height	542 mm
Electr. Connection	200-240 Volt (50 Hz)
Engine technology	D-LE 255 S/CAM (collector-engine) D-LE 255 SB/CAM (Brushless- engine)
Power consumption	max. 1100 Watt (power of the fan)
Air flow rate	max. 55 l/sec.
Sound pressure level	52 dB(A) at min. Air volume 64 dB(A) at max. Air volume
Fine filter quality	Dust class M, DIN EN 60335-2-69
Filter area	1,4 m2
Hose connection	Ø 50 mm

FILL Volume	10 kg
Weight	25 kg
Housing	RAL 9002 – powder-coated

Information material

No downloads found.

Product variants & scope of delivery

Article no.	Type	Scope of delivery	Engine technology
10622	D-LE 255 S/CAM	Connection set: 2x connection pipe Ø 50 mm, 1x connection adapter Ø 40 mm, 1.50 m suction hose Ø 50 mm Interface cable(depending on manufacturer) dustbag	Collector-engine
10623	D-LE 255 SB/CAM	Connection set: 2x connection pipe Ø 50 mm, 1x connection adapter Ø 40 mm, 1.50 m suction hose Ø 50 mm Interface cable(depending on manufacturer) fleecebag	brushless engine

Accessories

I have been working with Harnisch+Rieth equipment for over 30 years and I am thrilled!
Why? Because the best is always just good enough for me.
With quality for quality and beauty in the mouth.

Johannes MüllerMaster dental technician and oral designer

FAQ

Die Saugleistung ist nicht ausreichend

Blockageor leakage in the suction hose
Filter bag not mounted properly
Feinstfilter zugesetzt

LED Vorfilter Signalton

Filterbeutel austauschen

LED Feinstfilter

Feinstfilter tauschen, nicht reinigen!

Mindestluftstromvolumen ist unterschritten 5%

Nach 10 sek. wird ein Warnsignal ausgegeben. Nach einer Minute schaltet die Absaugung ab.

Weitere Fehlermeldungen

Siehe Betriebsanleitung S.15 Kapitel 4

Support

Write an email using the contact form or call us on:

0 71 81 / 96 78-0